Showing posts with label spinning. Show all posts
Showing posts with label spinning. Show all posts

Monday, November 4, 2013

Weaving Like A Celt Yet Again!

Weaving like a Celt is apparently something we do quite a bit.  The 2013 Austin Celtic Festival has come and gone and we have a mostly-finished tartan on the loom, a full bobbin of spun yarn and lots of happy memories!

This is the first year we've used the rug and bench pads - I barely got them finished in time.  Here is the booth set up and ready to go on Saturday morning:

George and the Booth
I am SO glad I made the pads, especially, as we were much more comfortable this year than we have been in the past.  I now need to finish the bench pads for my studio weaving benches.  Here's a close-up of the spinning wheel and its rug:

Now add one spinner and you get this!

We were especially fortunate to have Cassandra with us on Saturday.  This may be her last demonstration with us as she's moving on with her life.  On Sunday, we had two friends come who innocently thought they were going to drop by to see us and then enjoy the rest of the Festival.  They stayed and worked almost all day!  Chris worked the loom and Patrick the spinning wheel, freeing me up to do presentations.  Such a luxury!  Thanks to both of you!

So now I have to come down off my cloud and get back to work, both the day job and the studio.  Although I don't have photos of it, the tartan is coming out beautifully.  I adore the Maine Line 2/20 and will probably use it extensively in the future.

Sunday, March 6, 2011

The Windy Hill


They told us that the Hill is always windy.  Maximum winds of 31 mph gusting to 44 mph is... well... a bit brisk.  Weaving in 31 mph winds is interesting.  Spinning in 31 mph winds is an adventure.  Drop spinning in 31 mph winds is an entirely new experience.  The lulls when the wind dropped to below 15 mph felt blessedly still.  Sadly, they were few and far between.  The St Francis Upon the Hill Renaissance Faire was fun this year!!

So what's with the weather??  The week before the fair was mild, sunny and truly spring-like. Saturday dawned grey, windy, cold and rainy.  Fortunately, there wasn't much rain and what there was cleared out by the opening.  However, we had to wait until the last possible minute to set up the loom and spinning wheel.

I'll say this for wrestling an 8-harness loom to an outdoor event.  Short of a hurricane or tornado, the thing isn't going anywhere.  The same could not be said for anything else!  We foolishly choose to take one of the antique spinning wheels.  The poor thing was knocked down by the wind twice before we figured out how to orient it (edge-on into the wind presenting the least profile possible).  Anything not anchored down simply blew away.  I figure the downwind neighbors had a small sheep's worth of wool by closing.  Bits of roving were constantly taking flight.

Having said all this, it was a good fair from our point of view.  We were constantly busy.  Cassandra had trouble with the drop spindles in the wind, so she switched to demonstrating the weaving most of the time.  I spelled her with weaving, but mostly worked the spinning wheel.  George, the brave, kept up his drop spinning school.

We had a few scares.  The harnesses on the loom wouldn't fall completely down as they were supposed to.  We think this was because the loom was on slightly uneven ground, which might have introduced some torque into the frame.  (Note to self:  Always put the loom on the most even ground possible.)  The driveband on the spinning wheel broke necessitating a quick repair. (Note to self:  Always take a spare driveband!)  Then the mother-of-all got misaligned with the wheel causing the driveband to throw.  Once we made a few quick adjustments, spinning on the wheel worked rather well.  I had to tear off small pieces of roving and frequently join, though, as long lengths of roving would quickly become windblown and matted.  George's drop spinning school was more of a challenge than usual.  With a lightweight spindle, the tussle between gravity and the wind was a draw.  The spindles would drop... at a 45-degree angle.  That and the wind kept them from spinning for very long.  (I don't think there's a note-to-self here.)

In spite of it all, we almost finished the pinwheel scarf.  I finished it up today and it's setting on the loom.  I'll wet-finish it tomorrow.  The more I look at it, the greater the temptation becomes to make it into a bodice or vest.  I managed to get quite a bit of pale pink bamboo spun.  If I have enough, it's destined to become an Atwater-Bronson shawl.  It'll be a scarf if I don't have enough.

The huge shawl is Wonderful!!  It's so big and warm and worth every minute of agony I went through making it.  Cassandra and I took turns wrapping up in it.  I did get one scare as somehow it got hooked on the spinning wheel flyer.  I don't think it suffered any permanent damage, though.

It's wonderful doing a fair at a church - especially St. Francis Episcopal Church.  Again this year, we were stationed by the labyrinth.  At the end of the fair last year, I took the time to walk it.  Cassandra wanted to walk it this year.

Walking the Labyrinth

Thursday, February 24, 2011

Weaving My Spinning

I have wanted to do this forever! I'm weaving with my own handspun yarn. I bought the tussah-merino for this years ago and started on the blue. I don't even remember when I finished it, plied it and skeined it. It sat in the stash, waiting patiently while I spun the grey.  It wasn't as obviously beautiful as the blue and it took forever!  But at the back of my mind while I've been spinning, I've been planning to use the handspun to weave a pinwheel scarf.

Here's the scary thing, though.  A loom, especially a floor loom, puts quite a bit of tension on the warp threads. I was afraid that my handspun wouldn't stand up to the stress. Some people say it probably will.  Some people recommend soaking the warp in unflavored liquid geletin to strenghten it. Some people say to use handspun only in the weft or on a rigid heddle loom, if you must weave it.

But think about it.  Spinning was, in fact, one of the first activities taken over by the Industrial Revolution, but that was only in the 1800's. What did weavers do for thread before that?  They used handspun, of course.  So it's obviously a doable thing.  In fact, some cultures still use spindle spun threads to weave.  So there!

The St. Francis Upon the Hill Renaissance Faire is coming up.  We demonstrated spinning last year.  It worked so well that we've been invited back and asked to weave as well. One of the questions we got last year was "What do you do with all that stuff? (that you spin)"  I quickly knitted a shawlette out of handspun llama to show one thing.  Getting ready for the Faire this year, I thought about that pinwheel scarf.  Was there any way I could get the grey done in time??

Well, I did.  It spun up a little thicker than the blue, but it's done! Warping the loom was a challenge. The yarn still had residual twist in it and it wanted to wrap itself all over the place.  But many hours of coaxing later, I got the loom warped.  Bringing it up to tension was kind of nerve-wracking.  But hey, if I break a warp thread, so what?  It wouldn't be the first nor the last that's broken.  I know how to fix a broken thread.

The yarn has some residual fuzz to it. It pays to take time to get the weaving right because un-weaving it is difficult.  The threads kind of want to lock together and have to be teased apart.  But still.  It's working!

I wonder what they'll ask this year.  Probably "What do you do with all that stuff you weave??"  I guess I'd better plan on weaving something and making it into a bodice or vest or something.

Which gives me an idea...

Monday, December 21, 2009

Anchoring, Pressure Cookers and Alcohol Stoves

We spent part of this past weekend aboard Gypsea.  Maybe we should have spent the entire weekend as it was the first pretty weekend we've had in a while, but we had chores to do at the land-based home. We went to the Pearl Farmer's Market on Saturday morning instead of the Austin market. While the Austin market has more vendors, the Pearl market seems friendlier to us. We wanted our last market visit of the year to be the Pearl market. I didn't beat out whoever cleans the beef lady out of short ribs.  I'll perfect my technique next year!

We visited Yarnorama in Paige TX Saturday early afternoon. It's a great place and may well become one of my favorite LYS (Local Yarn Shops). She has an entire wall of spinning fiber. I walked out with two new spindles, two DVD's, two bags of fluff, and a skein of locally-produced yarn. One bag of fluff is a merino/yak blend, which just BEGS to be petted.  It's so soft. The other is a wool/bamboo/mohair blend. Both are spinning well on the spindles. Since spindle-spinning works on the boat with its limited space, I'm converting as much spinning as possible to the spindle.

We found ourselves on the boat by late afternoon. The first thing we discovered was that we were out of fresh water! Apparently, we'd used more last visit than we realized. After refilling the fresh water tank, I brought out the new 4-quart pressure cooker. Opinion among cruising cooks seems to validate the importance of a pressure cooker aboard a sailboat. Because it cooks so much more quickly, it uses less fuel. The new pressure cookers are much less scary and more safe than the older versions. I have a 6-quart model at home, but only find myself using it for dried beans. One of my current resolutions is to learn to cook in it. While we were shopping for "boat food", I carried the cookbook that came with the 4-quart model and chose ingredients for a kale-potato risotto. Later, on the boat with fresh water tank filled, alcohol pods filled and ingredients prepared, I waded into seeing how a pressure cooker would work on an alcohol stove. Let's merely say that it was the quickest, easiest, tastiest risotto I've ever made. In fact, with the pressure cooker, risottos become daily fare. Contrary to popular opinion among many sailors, the alcohol stove is a fine heat source.

Sunday morning found us rigging the anchor rode to the anchor and motoring out to the Sometimes Islands (at least the lake level is up so they're not the Sometimes Penninsula!) to practice anchoring. This was our first time to anchor since our advanced sailing classes, our first time to anchor Gypsea, and our first time without our instructor or other knowledgable person by our side.  It took us two tries, but we did it! The anchor didn't set the first time, but the second time I felt it hit bottom soundly.  It drug only a little as we backed away from it and then set securely.  We shut off the engine and proceeded to settle back to watch the afternoon sailboat traffic on the lake. I wandered below to fix lunch, this being the second time to prepare a full meal while not in the marina. As calm as the lake was, it's still a different ballgame to cook in the relative stillness of the marina as opposed to open water.  Lunch was farmer's market veggies with homemade hummus brought from home and a potato/cheese dish I made up on the fly with ingredients we had on board. It's such a luxury to sit in the cockpit on a sunny day in late December, eating lunch and watching the sailboats go by.  As the afternoon wore on, it got colder, so we pulled up the anchor and went back to the marina.

We opted to cook an early supper on the boat and then head home. We're finding that our desire to eat in restaurants has faded amazingly. We've been a month away from having anything in a restaurant and find we don't miss it at all. But this is another story entirely!

Sunday, December 13, 2009

10,000 hours

Just finished my 7th pair of Cat Bordhi's Tibetan Socks. I finally found a good combination of needle size and yarn. Crystal Palace's Mini-Mochi, held double, on size 4 needles is perfect for me. They make thick, soft socks that slip comfortably over the heel, yet still fit elsewhere. The more subtle gradations in color are beautiful. As nice as the Tibetan socks are, I'm purposing a couple of skeins of yarn for nice, thick slipper socks to wear around the house.

I've committed to learning to knit Continental style as opposed to English. It's a major re-learn for me as I've knitted English style since I was 8 years old. I think Continental style will be easier on my aging hands and allow me to knit certain patterns faster. It's certainly not faster now, though! I'm early in my 10,000 hours to mastery!

I'm spending far more time spinning - some on the wheels but significantly more on drop spindles than I have in the past. Part of it is the colder, darker time of year that seems made for spinning! I like to imagine my antique wheels whispering to me about cold winter nights in their past, long before I ever sat to spin with them. Part of it is committing to master spinning on a drop spindle after reading Respect the Spindle. I sat in the doc's office, waiting for my Well Woman check yesterday, spinning away on a bottom-whorl Emily spindle. It's funny to see people trying so hard not to stare or talk to me, but curious. I probably should have elicited conversation, but I'm not yet at the point where I can spin with a spindle and chat easily. Also, spinning is a very Zen activity for me and I like being in the moment with it. I'm a little farther along in my 10,000 hours to mastery here.

More later about local eating, slow food, and farmer's markets.